top of page


Wheelchair Compatibility
Pop n Drop does not require any hardware mounted onto the wheelchair, but couples directly to the wheelchair. Who wants extra crap mounted onto their wheelchair anyway? Since wheelchairs come in various sizes , each Pop n' Drop is adjustable to your wheelchair size. Pop n Drop is compatible with rigid wheelchairS that have rigid footrests (as shown on the right).

Pop n' Drop fits the standard ¾” footrest tubing size. See photo that shows tubing size measurement. TiLite, Quickie and Action all have ¾” footrest tubing.

Pop n Drop is not intended to be used with folding wheelchairs or wheelchairs that have swing away foot rests AS SHOWN ON THE RIGHT.

Wheelchair footrest width needs to be between 7” and 10”.    

See photo for footrest width measurement.   



You also need a minimum of 3/4" of YOUR FOOTREST BAR ON EACH SIDE for the Pop n Drop to attach to YOUR WHEELCHAIR. See photo on LEFT.

Grow Your Vision

Using the Pop n' Drop

Used properly, the Pop n' Drop will provide you with an alternate mode of transportation as well as lots of fun. The number one priority is safety! That includes always wearing a suitable helmet and not going too fast. It is recommended to throttle your scooter down to a slower maximum speed. This is possible on the EcoReco and other similar scooters. Instructions for doing this have been provided. In addition, never travel on roads with lots of car traffic. A bike trail, sidewalk or slow, non-busy street are ideal. So, make sure to start out slowly and keep it slow until you have more experience.

Don’t take turns too sharply and be alert!


With the wheelchair attached to the scooter via Pop n' Drop, the wheelchair is in a ‘popped’ position, which some riders may find uncomfortable. To minimize the amount of ‘pop’ your wheelchair has while riding your scooter, adjust your wheelchair foot support to the highest position possible, but not more than 5 ½” from the ground. This will allow you to ride the scooter with only a slight pop, which is more comfortable.

Manual wheelchair users can enjoy the thrill of riding a power scooter!


Did you ever feel like riding a power scooter? Ever have the urge to go farther or faster in your manual wheelchair? Pop n' Drop is the answer! Pop n Drop is an absurdly simple device that allows you to ‘connect’ your wheelchair to a power scooter. It takes about 10 seconds to engage and doesn’t require any hand dexterity to lock in (very quad-friendly)! Once engaged, your wheelchair is ‘one’ with the scooter. You now have the power and speed of an electric scooter.


Pop n Drop is the perfect fit for the manual wheelchair user that wants to continue using a manual chair, but needs an occasional boost. Sore shoulder? Give your shoulders a rest! Use the Pop n Drop to go cruising around the park. Want to go to the supermarket without the hassle of transferring into the car? Pop into the Pop n Drop and ride to the store

(and into the store)!


Scooter Compatibility

Pop n Drop does NOT include the scooter. The recommended scooter for the Pop n' Drop is the EcoReco, a lithium battery powered scooter. It's a  high quality product with incredible performance features, like 20 miles on a charge and a top speed of over 20 miles per hour!

EcoReco M3, M5, S3 and S5 are all compatible  –

available online or in US scooter stores


The electric scooter with Pop n Drop attached can still be ridden in the standing position by an able bodied rider. That means your device may be getting a lot of use by the kids or grandkids when you’re not riding it.




(727) 481-2034

bottom of page